Hackney Designs is a website showcasing Hackney Holsters as well as other leather products, Laser work products and 3d printed products. Our commitment to quality is the same no matter what we create. If you ever have any concerns, please send a message on the contact page. We respond to all messages.
Hackney Holster of Hackney Designs is a gun-loving-owned & operated Leather Holster Company. We believe that your right to own and carry a concealed firearm is one of the most important privileges we have in our great country.
We want to make sure you can carry your gun properly, comfortably and safely.
We started making holsters when we found most store-bought holsters did not meet our standards. We decided if we wanted a holster fit to our gun that had the Quality and Craftsmanship we looked for, we had to do it ourselves.
After many trips to the local leather store and a lot of money spent, research, practice, and prototypes were made. We finally had the Quality and Craftsmanship we wanted in a Leather Holster.
A Quality Holster must start with Quality Leather. The Veg-Tan Leather we use on our Holsters is tanned by Wickett & Craig Tannery (located in Pennsylvania). They are a US Company and have been processing leather Since 1867.
Our holsters are not a “one size fits all”. They are “Gun Specific” meaning they only fit one gun properly. The Holster is “wet” molded to a mold (Dummy Gun) of your firearm. Wet molding to the Specific Firearm is one of the many steps to guarantee your unaltered gun will fit perfectly.
Our values of Quality and Craftmanship apply to my holsters as well as our business practices. We believe there are no short cuts to making a quality holster. You can always contact us in advance with questions, requests or concerns before you order so that you know what you are ordering. In addition, should you have any concerns after receiving the holster, contact us to discuss it. We take great pride in our work and in our business values. Our word is our bond.
Thank you for checking out the website. We are happy to answer any questions you have about your Holster needs. Feel free to send a message from the contact page. We answer messages as quickly as possible.
Proudly Made in Tennessee USA
*DISCLAIMER:
Hackney Holsters are custom-made to fit the standard factory firearm.
Modification to the firearm, including & not limited to extended slide releases, laser sights, removal of trigger guard, or any alteration to the frame or external dimensions of the firearm may cause the holster to fit improperly and could increase the risk of accidental discharge or damage to the firearm.
No attempt should ever be made to alter or modify a Hackney Holster or any other leather goods produced by me.
All holsters and leather goods should be inspected prior, during, and after each use by the user for damage such as worn parts, loose stitching, poor retention, etc. Should the holster become loose, defective, or ill-fitting at any time then the purchaser/user should cease use immediately of the product.
Always make sure you test the holster for proper fitting and retention with an unloaded firearm before use. Upon purchasing the holster or any accessories, it is the sole responsibility of the purchaser/user, to deem that the holster or accessory is safe and fit for their intended use.
All risks and liability shall be on the purchaser/user of the holster and accessories in the way they are intended to be worn and used.
By purchasing a Hackney Holster or any leather item, the purchaser/user hereby acknowledges that firearms are dangerous and potentially deadly, and release HACKNEY HOLSTERS and its owner & associates from any and all liability of injuries or accidents relating to the use of the holster.